Jura Regulating Unit (Frother) for the Cappuccinatore replaced with new Jura OEM part. Silver Pomace Tray Cover replaced with new Jura OEM part.
Water Tank Cover replaced with new Jura OEM part. Bean Container Cover replaced with new Jura OEM part. Silver Vented Cover Display Module replaced with new Jura OEM part.
Heat Exchanger to Water Pump Hose replaced with new Jura OEM part. Thermoblock Outlet Valve pin replaced with new Jura OEM part. Grinder disassembled, cleaned, reassembled and re-calibrated. Exterior stainless steel drip tray grid refinished to remove scrathes and restore luster. Please see the pictures of the internals to get an indication of how clean the instrument is and the extent of the refurbishing. Tested and fully functional of course!Key Features of the Jura Impressa J9.3. Choose between multiple strengths and serving sizes, three temperature levels for hot water and two coffee brewing temperatures. A conical burr coffee grinder has variable fineness adjustment and the. 15-bar power pump makes delicious, high-pressure brewed coffee. Smart monitors indicate when water or beans need to be added.
The Jura IMPRESSA J9 features TFT display and a rotary dial to ensure that you can access all of its features with ease. You press the button to make a selection and the machine does the rest. These advanced functions mean brewing specialty coffee has never been easier. An adjustable cappuccino spout allows you to dispense cappuccino in a small cup or latte macchiato in a tall glass from the Jura Impressa J9 One Touch TFT. Select the button to adjust the height up to 6 inches tall for the perfect pour. Jura pioneered fine foam technology that produces fine, feather-light milk foam to add the finishing touch to a cup of specialty coffee. Refurbished using the following procedures. Disassemble, clean, and sanitize the enclosure. Disassemble brew group and drainage valve, clean & sanitize, before reassembling with a complete set of Jura OEM o-rings & seals. Descale the machne including the thermal block, and all parts of the water/coffee flow path including water tubing, flow sensor heat exchanger and valves.Completely disassemble and descale the coffee dispensing spout. Clean and sanitize all parts. Disassemble the steam valve, clean all internal parts verify proper steam and hot water dispensing. Disassemble the thermoblock outlet valve, clean internal parts, lubricate, replace pin. Check grinder burrs for wear, sharpen/recondition or replace.
Reassemble machine and pull espresso shot, check the coffee puck including shape and dryness to confirm a successful refurbishment. You may notice some coffee in the machine when you get it. This is normal because it is necessary to test the machine by pulling a few shots, so there will be some leftover grounds and a little water.
Also you might want to discard the first couple of shots, as Jura recommends. Please let me know if you have questions. Be kind to your machine, don't use oily beans! This item is in the category "Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Coffee, Tea & Espresso Makers\Espresso & Cappuccino Machines".
The seller is "puckman99" and is located in this country: US. This item can be shipped to United States.